Kemper 79 002 Instrucciones De Servicio página 68

Pos. Description
1 Wall mount bracket
1.1 Flange seal
1.2 Round steel
1.3 Screw M6 x 40mm (8 x)
3. Place the flange seal (Pos. 1.1) on the slewing ring (Pos. 1).
4. Screw the slewing ring (Pos. 1) + flange seal (Pos 1.1) under the wall
mount bracket (Pos. 10) For this purpose, use the enclosed fixing
material (Pos. 1.3 + 1.4 + 1.5).
Pos. Description
1 Slewing ring
1.2 Round steel
5. Screw the support frame (Pos. 7) in folded position with the joint plate
(Pos. 5) to the round steel (Pos. 1.2). Use the enclosed fixing material for
this purpose.
1502759-03
Tab. 33: Mounting the slewing ring
Fig. 31: Mounting the mounting frame
Tab. 34: Mounting the mounting frame
- 68 -
Pos. Description
1.4 Washer M6
1.5 Hexagon nut M6
10 Wall mount bracket
Pos. Description
5 Hinge sheet
7 Mounting frame – square
tube
EN