Kemper 79 002 Instrucciones De Servicio página 80

A Mobile filter unit
B Stationary filter unit
4 Connection cable 20 metres
[787.4 inch]
1. Connect the connection cable (Pos. 4) to the unit. To do this, insert the
connector plug (Pos. 4.1.) into the connection socket (Pos. 4.2).
2. Pull the connecting cable through the slewing ring.
3. For further steps see chapter: Cable routing + connection of the
extraction hood with lighting.
5.5.2 Cable routing and connection - Control Box/
Transformer Box
Pos. Description
C Stationary filter unit
D Control box
E Transformer box
1502759-03
4.1
4.2
7
Tab. 45: Positions on the product
Fig. 45: Cable laying – stationary unit
Pos.
4
4.1
7
Tab. 46: Positions on the product
- 80 -
Connector plug 4-pole
Connection socket 4-pin
Slewing ring - extraction arm
Description
Connection cable 20 metres
[787.4 inch]
Connector plug 4-pole
Slewing ring - extraction arm
EN