Kenmore KW3010 Manual De Uso Y Cuidado página 10

Always follow all safety precautions when performing maintenance to the vacuum cleaner.
WARNING
Always disconnect the plug from the
outlet before removing the powerhead
from the collection tank.
1. Verify that the power cord is
disconnected from the outlet.
2. Disconnect the hose from the vacuum by
turning counter-clockwise.
VACUUM MAINTENANCE AND CARE
EMPTYING THE COLLECTION TANK
3. Undo the latches and remove the
powerhead from the collection tank.
Place powerhead on a soft, clean
surface upside down.
4. Clear all dirt and debris from the
collection tank and hose into a proper
waste container.
5. Clean or replace the filters.
6. Check the hose, accessories, and power
cord to verify that they have not been
damaged.
7. Place the powerhead back on collection
tank and secure latches.
- 10 -