Publicidad
Idiomas disponibles
Idiomas disponibles
REMOVING & CLEANING THE AIR INLET FILTER
3. Wash and rinse the air inlet filter with
cool clean water.
4. Allow the wet filter to air dry for 24
hours before re-installing.
CAUTION
Make sure that the pre-filter and air inlet
filter are dry before use, otherwise it
may cause poor cleaning performance
or damage to the motor.
REMOVING & CLEANING EXHAUST FILTER
1. Verify that the power cord is
disconnected from the outlet.
2. Unlock the exhaust filter door by lifting
both of the locking tabs upwards and
pull the door out.
Locking Tabs
Exhaust Filter Door
5. Re-install the cleaned air inlet filter.
6. Place the powerhead back onto the
collection tank.
3. Remove the exhaust filter from the
vacuum and clean by gently tapping
or brushing off dirt. If necessary, gently
rinse the exhaust filter with cool clean
water. Do not scrub or brush the exhaust
filter while wet. Allow the exhaust
filter to air dry for 24 hours before re-
installing.
Exhaust Filter
4. For optimal performance, it is
recommended to replace the old exhaust
filter with a new filter every year.
CAUTION
Make sure the exhaust filter is dry
before use.
- 12 -
Publicidad
