Publicidad
Idiomas disponibles
Idiomas disponibles
GUI – Image
6.1 Setting image levels manually
Purpose
Contrast: Change the contrast of the complete output signal (main and PiP window together) of the projected
image.
Brightness: Change the brightness of the complete output signal (main and PiP window together) of the
projected image.
Saturation: Change the saturation of the complete output signal (main and PiP window together) of the
projected image.
How to set up Contrast
1.
In the main menu, select Image → Contrast.
Imagen 6–1 Image menu — Contrast
2.
Use the ◄ or ► key to change the contrast enhancement until the desired value is reached (adjustable
between 0 and 2).
Imagen 6–2 Example of the image sliders, contrast is the first slider
3.
If necessary, use the ▲ or ▼ key to select the other image adjustment options.
How to set up Brightness Level
1.
In the main menu, select Image → Brightness.
Imagen 6–3 Image menu — Brightness
2.
Use the ◄ or ► key to change the brightness until the desired value is reached (adjustable between –1 and
1).
48
R5913592ES /01
Njord
Publicidad
