Stihl HTA 135 Manual De Instrucciones página 15

6 IMPORTANT SAFETY INSTRUCTIONS
– Check chain tension periodically thereafter at
regular intervals (only after removing the battery).
￭ Using a pole pruner that is modified, damaged, improperly
adjusted or maintained, or not completely and securely
assembled can lead to a malfunction and increase the risk
of serious personal injury or death.
– Never operate a pole pruner that is modified,
damaged, improperly maintained or not completely
and securely assembled.
– Always check your pole pruner for proper condition
and operation before starting work, particularly the
retaining latch, Ergo-Lever, trigger switch and
cutting attachment.
– Ensure that the retaining latch, Ergo-Lever and
trigger switch move freely and spring back into place
when released. The trigger switch must not engage
until the retaining latch is unlocked.
– Never attempt to modify or override the controls or
safety devices in any way.
– If your pole pruner or any part is damaged or does
not function properly, take it to your authorized
STIHL servicing dealer. Do not use the pole pruner
until the problem has been corrected.
￭ Before inserting the battery:
– Check the contacts in the battery compartment for
corrosion or other foreign matter. Keep clean.
– Never insert or use a malfunctioning, damaged,
cracked, leaking or deformed battery.
– Read and follow the instructions on switching on the
pole pruner, @ 16.1.
￭ To help reduce the risk of serious personal injury or death
from unintentional starting:
– Release the trigger switch and trigger switch lockout
before inserting the battery.
– Release the trigger switch before removing the
battery.
0458-698-8621-A
– Remove the battery before assembling,
transporting, adjusting, inspecting,
cleaning, servicing, maintaining or
storing the pole pruner, and any time it is
not in use.
– Never leave the pole pruner unattended when the
battery is inserted.
– Never store the battery in the pole pruner.
￭ Before switching on your pole pruner, take the following
steps to reduce the risk of personal injury from loss of
control or inadvertent contact with the chain:
– Be sure that the guide bar and chain are clear of you
and all other obstructions and objects, including the
ground.
– Never attempt to switch on the pole pruner when the
guide bar is in a cut or kerf. Doing so could lead to
reactive forces and injury.
– Read and follow the instructions on switching on the
pole pruner, @ 16.1.
6.5.2 Holding and Controlling the Pole Pruner
WARNING
￭
English
13