Cameo X3 TW Manual Del Usuario página 13

6
OLED DISPLAY
The OLED display shows the currently activated operating mode (main display), the menu items in
the menu and the numerical value or operating status in the corresponding menu items. If there
is no input for approx. 30 seconds, the display automatically returns to the main display. Note on
the main display in the operating modes with external control: As soon as the control signal is
interrupted, the characters in the display start flashing; if the control signal is present again, the
flashing stops.
7
ROTARY-PUSH ENCODER
Use the rotary-push encoder to navigate in the unit menu and configure the spotlight:
Open the main menu: Press encoder
select (sub)menu item: Rotate encoder
open (sub)menu item: Press encoder
Change value or status: Turn encoder
Confirm change: Press encoder
Exit menu level: Select and confirm the arrow symbol
SECURING LUG
One safety eyelet each for securing the headlamp when mounted overhead is located on the top
and bottom of the headlamp.
13