Maruyama MBS360 Manual Del Propietário página 6

Bind the throttle cable and the fl exible shaft with four bands.
LOOP HANDLE
1. Place the loop handle and the bottom clamp on the
shaft assembly.
2. Install the four screws and nuts. Leave the screws
fi nger-tight.
3. Reposition the loop handle up or down the shaft
assembly to the most comfortable position.
4. Tighten the screws and nuts.
Screw (4)
Nut (4)
＿ US-4 ＿
Flexible Shaft
Throttle cable
Band (2)
Loop Handle
Shaft Assembly
Bottom Clamp