Descargar Imprimir esta página

LIVARNO LUX 287043 Instrucciones De Montaje página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Safety instructions for
batteries / rechargeable
batteries
DANGER TO LIFE! Keep batteries / recharge-
able batteries out of reach of children. If acci-
dentally swallowed seek immediate medical
attention.
DANGER OF EXPLOSION!
Never recharge non-rechargeable
batteries. Do not short-circuit batteries /
rechargeable batteries and / or open them.
Overheating, fire or bursting can be the result.
Never throw batteries / rechargeable batteries
into fire or water.
Do not exert mechanical loads to batteries /
rechargeable batteries.
Risk of leakage of batteries / rechargeable
batteries
Avoid extreme environmental conditions and
temperatures, which could affect batteries /
rechargeable batteries, e.g. radiators / direct
sunlight.
Avoid contact with the skin, eyes and mucous
membranes. In the event of contact with battery
acid, thoroughly flush the affected area with plenty
of clean water and seek immediate medical
attention.
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries /
rechargeable batteries can cause
burns on contact with the skin. Wear suitable
protective gloves at all times if such an event
occurs.
In the event of a leakage of batteries / recharge-
able batteries, immediately remove them from
the product to prevent damage.
Only use the same type of batteries / recharge-
able batteries. Do not mix used and new batter-
ies / rechargeable batteries.
Remove batteries / rechargeable batteries if the
product will not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery / recharge-
able battery!
10 GB/IE
Insert batteries / rechargeable batteries accord-
ing to polarity marks (+) and (-) on the battery /
rechargeable battery and the product.
Clean the contacts on the battery / rechargeable
battery and in the battery compartment before
inserting!
Remove exhausted batteries / rechargeable
batteries from the product immediately.
Initial Use
Note: Remove all packaging material from the
product.
Ensure that the product is turned off (see fig. B).
Inserting / changing the
batteries
Open the battery cover
fig. A + E).
Remove the old batteries. Insert new batteries
into the battery compartment
the polarity (+ and -).
Close the battery cover
Mounting product (see fig. D + H)
Drill mounting holes (approx. ø 6 mm).
Insert the dowels
6
sary, use a hammer.
Insert the screws
4
Attach the product to the screw so that the screw
for handheld assembly
the back of the product.
After assembly, ensure that the product is
mounted securely.
Use
Model A
Use the 69 letters, numbers & symbols
express yourself (see fig. C).
and take it off (see
2
. Please note
1
(see fig. A + E).
2
into the drill holes. If neces-
into the dowels
.
6
lies in the hanger on
5
to
7

Publicidad

loading