Description Of The Error Message System; Receipt Of Centrifuges To Repair; Transport, Storage And Disposal; Transport - OHAUS Frontier FC5706 Manual De Instrucciones

TM
Frontier Centrifuge FC5706

6.2.2 Description of the error message system

The error message "error" (M11) is shown in the "Time" (A-3) display (See figure 29). Detailed information about
possible error messages are in "table 5: error messages" (See Appendix).
M11
Figure. 29

7. RECEIPT OF CENTRIFUGES TO REPAIR

Health risk from contaminated equipment, rotors and accessories.
In case of returning the centrifuge for repairing to the manufacturer, please notice the following:
The centrifuge must be decontaminated and cleaned before the shipment for the protection of persons,
environment and material.
A decontamination certificate needs to be filled in and enclosed with any returned goods. (See APPENDIX)
We reserve the right to not accept contaminated centrifuges.
Furthermore, all costs occurred for the cleaning and disinfection of the units will go to the debit of the customer's
account

8. TRANSPORT, STORAGE AND DISPOSAL

8.1 Transport

Before transport, take out the rotor.
Only transport the unit in the original packaging.
Use a transport aid for transporting over longer distances to fix the motor shaft.
General transportation
8.2

Storage

During storage of the centrifuge the following environmental conditions must be observed:
in transport packaging
Air temperature rel. humidity
-25 to 60 ° C 10 to 75 %
Air temperature rel. Humidity
-25 to 55 ° C 10 to 75 %
A-3
Air pressure
30 to 106 kPa
Air pressure
70 to 106 kPa
EN-15