Parker Hiross Hyperchill-Plus ICEP007 Manual De Uso página 11

Index
1 Safety
1.1 Importance of the manual ................................................................1
1.2 Warning signals ................................................................................1
1.3 Safety instructions ............................................................................1
1.4 Residual risks ...................................................................................1
2 Introduction
2.1 Transport ...........................................................................................2
2.2 Handling ...........................................................................................2
2.3 Inspection .........................................................................................2
2.4 Storage .............................................................................................2
3 Installation
3.1 Operating space ...............................................................................2
3.2 Versions ............................................................................................2
3.3 Water circuit ......................................................................................2
3.4 Electrical circuit ................................................................................3
3.5 Water-cooled version (W) .................................................................3
4 Control
4.1 Control panel ....................................................................................4
4.2 Starting the chiller .............................................................................4
4.3 Stopping the chiller ...........................................................................4
4.4 Parameter settings ...........................................................................4
4.5 Change parameters ..........................................................................5
4.6 Setting clock/date. ...........................................................................6
4.7 Visualization of temperature probes B1,B2 .....................................6
4.8 Alarms management .........................................................................6
4.9 Alarm/Warning history ......................................................................7
4.10 Automatic restart ............................................................................7
5 Maintenance
5.1 General instructions ..........................................................................7
5.2 Preventive maintenance ...................................................................7
5.3 Refrigerant ........................................................................................7
5.4 Dismantling .......................................................................................7
6 Troubleshooting
7 Appendice
,
Sono presenti simboli il cui signifi cato è nel paragrafo 7.1.
7.1 Legend
7.2 Installation diagram
7.3 Technical data
7.4 Dimensions
7.5 Spare parts
7.6 Circuit diagram
7.7 Wiring diagram
English
1 Safety
1
1.1 Importance of the manual
• Keep it for the entire life of the machine.
• Read it before any operation.
• It is subject to changes: for updated information see the version on
2 the machine.
1.2 Warning signals
!
Instruction for avoiding danger to persons.
Y
2
Instruction for avoiding damage to the equipment.
Z The presence of a skilled or authorized technician is requi-
red.
,
There are symbols whose meaning is given in the para. 7.
4
1.3 Safety instructions
!
Every unit is equipped with an electric disconnecting switch for
operating in safe conditions. Always use this device in order to elimina-
te risks maintenance.
!
The manual is intended for the end-user, only for operations
performable with closed panels: operations like installation/com-
missioning/maintenance or that requiring opening with tools must
be carried out by skilled and qualifi ed personnel.
7
Y
Do not exceed the design limits given on the dataplate.
! Y
It is the user's responsibility to avoid loads different
from the internal static pressure. The unitmust be appropriately
8
protected whenever risks of seismic phenomena exist.
Only use the unit for professional work and for its intended purpose.
The user is responsible for analysing the application aspects for pro-
duct installation, and following all the applicable industrial and safety
standards and regulations contained in the product instruction manual
or other documentation supplied with the unit.
Tampering or replacement of any parts by unauthorised personnel and/
or improper machine use exonerate the manufacturer from all responsi-
bility and invalidate the warranty.
The manufacturer declines and present or future liability for damage to
persons, things and the machine, due to negligence of the operators,
non-compliance with all the instructions given in this manual, and non-
application of current regulations regarding safety of the system.
The manufacturer declines any liability for damage due to alterations
and/or changes to the packing.
It is the responsibility of the user to ensure that the specifi cations provi-
ded for the selection of the unit or components and/or options are fully
comprehensive for the correct or foreseeable use of themachine itself
or its components.
ICEP007-030
!
IMPORTANT: The manufacturer reserves the right to modify
this manual at any time.
For the most comprehensive and updated information, the user is
advised to consult the manual supplied with the unit.
1.4 Residual risks
The installation, start up, stopping and maintenance of the machine-
must be performed in accordance with the information and instructions
given in the technical documentation supplied and always in such a
way to avoid the creation of a hazardous situation.
The risks that it has not been possible to eliminate in the design stage
are listed in the following table.
part residual manner of
affected risk exposure
heat exchanger
small cuts contact
coil
fan grille and lesions insertion of pointed
objects through the
fan
grille while the fan is
in operation
inside the burns contact
unit: com-
pressor and
discharge
pipe
inside the intoxication, defects in the
unit: metal electrical insulation of the
parts and shock, se- power supply lines
electrical rious burns upstream of the
wires electrical panel; live
metal parts
outside the intoxication, fi re due to short
unit: area serious circuit or overhea-
surrounding burns ting of the supply
the unit line upstream of
the unit's electrical
panel
precautions
avoid contact, wear
protective gloves
do not poke objects of
any type through the
fan grille or place any
objects on the grille
avoid contact, wear
protective gloves
adequate electrical
protection of the power
supply line; ensure
metal parts are properly
connected to earth
ensure conductor
cross-sectional areas
and the supply line
protection system
conform to applicable
regulations
1 / 8