Descargar Imprimir esta página

Festool CTH 26 E/a Manual De Instrucciones página 17

Ocultar thumbs Ver también para CTH 26 E/a:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Contents
1 Safety warnings.........................................17
2 Symbols..................................................... 18
3 Technical data........................................... 19
4 Intended use..............................................20
5 Machine features...................................... 20
6 Operation................................................... 20
1
Safety warnings
1.1 General safety warnings
WARNING! Read all safety warnings, instructions, illustrations and speci­
fications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
– This machine must not be used by persons (including children) with re­
duced physical, sensory or mental capabilities, or lack of experience
and knowledge. Children need to be supervised to ensure they do not
play with the machine.
– WARNING: This machine contains hazardous dust. Emptying and main­
tenance processes, including removing dust containers, must only be
performed by professionals with the relevant protective equipment and
according to this operating manual. Do not operate the machine without
the complete filtration system.
– Always use suitable protective equipment.
– If intact following a visual inspection, work in a dry environment accord­
ing to instructions.
– Risk of explosion and fire!Do not extract:
– Sparks or hot dust;
– combustible or explosive materials (e.g. magnesium, aluminium, pet­
rol, diluting agents – with the exception of wood);
– aggressive materials (e.g. acid, alkaline solutions, solvents);
– chemically reactive materials, which lead to the generation of heat,
acids/bases, gases, etc. (e.g. reactive two-component materials, alu­
minium and water).
– Observe all national safety regulations as well as the material manufac­
turer's specifications.
– Only use the electrical outlet module on the machine for its stated pur­
pose.
– Do not pull the plug from the socket by using the cable.
– Check the plug and the cable regularly in order to prevent a hazard. In
the event of damage, these must be replaced by an authorised service
workshop only.
7 Settings......................................................20
8 Working..................................................... 22
9 Service and maintenance..........................23
10 Accessories............................................... 24
11 Environment.............................................. 24
12 General information.................................. 24
English
17

Publicidad

loading