Kärcher IVM 40/24-2 H Manual De Instrucciones página 20

Information on accessories and spare parts
can be found in the Service area at
www.kaercher.com.
Please note:
● No accessories are included in the
scope of delivery. The accessories must
be ordered separately depending on the
application.
● The correct function of the device is only
guaranteed by the prescribed nominal
width of the suction hose (see chapter
Technical data).
● Spare parts and accessories are availa-
ble from your dealer or from your
KÄRCHER branch.
Scope of delivery
Check the contents for completeness when
unpacking. In the event of shipping dam-
age, please notify your dealer.
Description of the unit
For the illustrations, refer to the graphics
page
Illustration A
Steering roller with parking brake
1
Dirt receptacle
2
Sealing plug on the dirt receptacle
3
Sealing plug on the filter ring
4
Pressure gauge
5
Filter dedusting
6
Spacer lock
7
Suction turbine power switch
8
Suction head
9
filter
10
Sealing ring
11
Filter hold-down device
12
Type plate
13
Carrying handle
14
Mains cable
15
Cable clips
16
Spacer
17
Bow handle of the dirt receptacle
18
Push handle
19
Suction head lock
20
Filter ring
21
Suction hose port on the filter ring
22
Suction hose port on the dirt receptacle
23
Chassis
24
20
Symbols on the device
The device is suitable for vacuuming dusts
up to dust class H.
WARNING: This device contains dusts that
are harmful to your health. Emptying and
maintenance, including removal of the dust
bag, may only be performed by appropri-
ately trained personnel wearing suitable
personal protective equipment. Do not
switch on until the entire filter system has
been installed and the volume flow control
functionality has been checked.
Note
If necessary, remove the sticker in the rele-
vant national language from the enclosed
sheet of stickers and stick it onto the unit
over the German text.
The maximum vacuum value in relation to
the hose cross-section is specified on the
label. The actual value can be read on the
pressure gauge. For the values applicable
to this device, see chapter Reading the
minimum volumetric flow. If this value is not
reached, the filter must be cleaned (see
chapter Dedusting the main filter) or re-
placed (see chapter Replacing the main fil-
ter). The various different hose cross-
sections allow adaptation to the various dif-
ferent connection cross-sections of the ac-
cessories.
English