AFG 5.3AT Manual Del Propietário página 16

ASSEMBLY STEP 6
2
G 10
H
16
1 11
HARDWARE FOR STEP 6
PART TYPE
G SCREW
H SCREW
A Fold the deck into the upright position until
the FOOT LATCH (11) engages.
B Open HARDWARE FOR STEP 6.
C Attach BASE FRAME COVER (10) to
CONSOLE MAST (2) using 1 SCREW (H)
from the side.
Attach BASE FRAME COVER (10) to BASE
D
FRAME (1) using 3 SCREWS (G) from
above.
E Repeat on other side.
F While holding the deck with both hands,
press the FOOT LATCH (11) with your foot to
lower the deck to the ground.
ASSEMBLY COMPLETE!
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.
QTY
6
2