USING YOUR MEDIA PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the left of the console and the
headphone jack on your media player.
2) Use your media player buttons to adjust song settings.
ALL
3) Remove the AUDIO ADAPTOR CABLE when not in use.
MODELS
ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver™ mode. This mode is NOT automatically activated.
When Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after
15 minutes of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on
the console. This feature can be turned on or off in the engineering menu.
5.3AT:
To enter the engineering menu, press and hold the + INCLINE key and – SPEED key for 3-5 seconds. Use
the – / + keys to navigate through the menu to ENG3. Press ENTER to select. Use – / + keys to select ENRGY SVE
ON or OFF. Press and hold STOP for 3-5 seconds to exit ENG3. Press and hold STOP again for 3-5 seconds to exit
the engineering menu.
7.3AT:
Press and hold the + INCLINE and – SPEED keys for 3-5 seconds to enter engineering mode. A home
screen will appear. Press the SETTINGS button on the left side of the screen. You will see the words ENERGY
SAVER in the middle of the screen. Touch and select the ON or OFF prompt to control your preference. Then press
the HOME icon in the top right corner to exit engineering mode.
36
36