Beem Joy Cafe Manual De Instrucciones página 31

BEEM - Elements of Lifestyle
NOTE
► Do not overfill the strainer insert. An
overfilled strainer insert cannot be inserted
into the appliance.
► Remove any surplus coffee powder
from the edge of the strainer holder in order
not to stain the seal of the strainer holder
mounting (18).
8. Insert the strainer holder (15) into the ap-
pliance as described in the section Inserting
the strainer holder (page 23).
9. Place a suitable glass under the strainer
holder mounting.
10. Turn the milk froth regulator (7) to the
left. More milk than froth is required for latte
macchiato.
11. Press the selector button
First of all, the froth and the hot milk run into
the glass and then the coffee. Brewing finish-
es automatically or when the selector button
(14) pressed briefly to cancel brewing.
12. Use the ON/OFF switch (4) to switch the
appliance off.
Brewing a large glass of
latte macchiato
To brew a large glass of latte macchiato, pro-
ceed as follows:
1. Prepare the appliance as described
above.
2. Remove the strainer holder (15) and put
in the higher strainer insert (11).
3. Fill the strainer insert (11) with coffee
powder to the top and wipe off any excess
coffee powder with the handle of the measur-
ing spoon (9).
4. Press the coffee powder lightly but firmly
using the compacting aid of the measuring
spoon (9).
5. Insert the strainer holder (15) into the ap-
pliance as described in the section Inserting
the strainer holder (page 23).
6. Remove the resting grate and place a
large glass onto the drip tray (17).
7. Turn the milk froth regulator (7) to the
left. More milk than froth is required for latte
macchiato.
All manuals and user guides at all-guides.com
Press the selector button
First of all, the froth and the hot milk run into
the glass and then the coffee. Brewing finish-
es automatically or when the selector button
8. Use the ON/OFF switch (4) to switch the
appliance off.
1. Switch off the appliance and pull the plug
out of the mains socket.
2. Clean the appliance and the accessories
used as described in the section Cleaning
and maintenance (page 27).
Before beginning any work, pay attention to
(14) 1 x.
the safety instructions in the section Safety
instructions (page 17)!
1. Wipe the housing with a damp cloth.
1. Pour the remaining water out of the water
tank.
2. Clean the water tank in warm washing-up
water.
3. Rinse out the water tank with fresh water.
4. Pour the water away.
5. Allow the water tank to dry properly in
order to prevent mould from forming when
not using the appliance for longer periods of
time.
NOTE
►
in the dishwasher. Dishwasher tabs are
more aggressive than conventional deter-
gents and can damage both the seal and
chromium-plated lid of the water tank.
1. Take the strainer holder (15) with the
strainer insert (10 or 11) out of the appliance
as described in the section Removing the
strainer holder (page 23).
(14) is pressed briefly to cancel brewing.
After using
Cleaning and maintenance
Cleaning the appliance
Cleaning the water tank
The water tank should not be cleaned
Cleaning the strainer holder/strainer
insert
EN 27
(14) 2 x.