Installation
3.4. Electrical connection
WARNING:
A
via extension cables or multi-plugs.
WARNING:
B
must be replaced by the Authorized
Service Agent.
If two coolers are to be installed side
C
by side, there should be at least 4 cm
distance between them.
Our company shall not be liable for any
damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.
Power cable plug must be within easy reach
after installation.
Do not extension cords or cordless multiple
outlets between your product and the wall
outlet.
A
WARNING: "The protective films on the vertical handle" will be removed.
Do not make connections
Damaged power cable
Hot surface warning!
Your product is equipped with coolant
pipes to improve the cooling system for
the side walls. The hot fluid might flow
C
through these surfaces, causing heat on
the side walls. This is normal and does
not require service maintenance. Be
careful when touching these areas.
10 / 25EN
Refrigerator / User Manual