Peg-Perego Booklet Manual Del Usuario página 17

unscrew the waist belt on the side (fig_d) and remove
the seat fabric from the backrest (fig_e).
GANCIOMATIC SYSTEM
The Ganciomatic System is the quick, practical system
that allows you to fasten the Navetta Pop-Up and the
Primo Viaggio SL car seat (sold separately) onto the
stroller using the Ganciomatic hooks.
22 GANCIOMATIC HOOKS ON THE STROLLER: to lift the
stroller's Ganciomatic hooks, pull back the fabric at the
corners of the seat.
Lift the two Ganciomatic hooks which will
automatically move outwards.
_ To lower the hooks, proceed in the opposite order.
Primo Viaggio SL can be mounted on the stroller
version of Booklet with the backrest attached, or on
the Booklet Naked version (i.e. chassis version).
The Navetta Pop-Up can only be mounted on the
version with no backrest.
To transform Booklet into Booklet Naked, chassis
version, you must:
23 Remove the hood and the seat fabric from the stroller
(up to point C in figure 20); press the buttons under
the seat fabric at the base of the backrest (fig_a) on
both sides. Remove the backrest by lifting it upwards
(fig_b).
_ To transform the chassis back into the stroller version,
repeat the operations listed above in the opposite
order.
GANCIOMATIC FASTENING
24 Booklet + Primo Viaggio SL (fig_a)
To attach the car seat to the stroller or chassis, you
must:
_ Lock the stroller brakes;
_ Lift the stroller's Ganciomatic hooks:
_ Remove the bumper bar if mounted (sold separately).
_ If in place, remove the hood from the stroller and fully
lower the backrest. Once the seat has been fastened,
lift the backrest to the maximum height (fig_b).
_ Position the car seat, mum-facing, on the Ganciomatic
hooks and press down until they click.
_ To release the car seat from the stroller please read the
instructions book
Booklet + Navetta Pop-Up (fig_c)
To mount the Navetta Pop-Up on the chassis, you
must:
_ Lock the stroller brakes;
_ Lift the Ganciomatic hooks;
_ Remove the bumper bar if mounted (sold separately).
_ Position the Navetta Pop-Up, mum-facing, on the
Ganciomatic hooks and push it downwards, pressing
on the sides, until you hear the click.
_ To release Navetta Pop-Up from the stroller please
read the instructions book.
SERIAL NUMBERS
25 Information about the production date can be found
on the Booklet .
_ The product name, production date and serial number
of the chassis.
This information is required for any complaints.
ACCESSORIES
26 MOSQUITO NET: can be fastened to the hood (fig_a).
RAIN COVER: rain cover for Peg Perego strollers (fig_b).
FOOT MUFF: Can be applied onto the leg rest (fig_c).
27 BORSA: diaper-changing bag with pad for changing
baby's diaper (fig_a).
CHILD TRAY: Tray with antibacterial liner for Booklet
and Book Cross (Fig. b).
BABY CUSHION for Peg Perego high chairs and
strollers. Winter side made with cozy matelassé jersey
and summer side made with 100% cotton (fig_c).
28 BOOK BOARD: rear footrest plus two handlebar
extensions (fig_a).
VARIO FOOT MUFF: foot muff for Peg Perego strollers
(fig_b).
PARASOL: practical matching umbrella (fig_c)
29 BOOK HANDLE EXTENSIONS: two handle extensions.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE SEAT: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge and
soapy water; do not use detergents.
CLEANING FABRIC PARTS: Brush the fabric parts to
remove dust.
• When washing, closely follow the instructions stated
on the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001 certified
company. This certification is a
guarantee for customers and consumers
of the transparency and trustworthiness
of the company's procedures and
working methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and queries
are fully satisfied. It is a key part of our policy to ensure
we are always aware of our customers' views and
requirements. We would therefore be very grateful if,
after using a Peg Pérego product, you take the time to
fill in our CUSTOMER SATISFACTION QUESTIONNAIRE,
making a note of any comments or suggestions you
might have. You can find the questionnaire on the Peg
Pérego website: www.pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and
orders for genuine original replacement parts and
accessories, please contact Peg Perego After Sales
Service indicating the product serial number, if any.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.it
website www.pegperego.com
- 17 -