Publicidad
Idiomas disponibles
Idiomas disponibles
Large cover
Figure
Small cover
Large cover
Model
Number
Small cover
Rated Flush Volume
Toilet type
Control stop inlet
Flush Valve inlet
Flush Valve outlet
Min
Supply water
(Flowing)
pressure
Max*
(Static)
Shutoff pressure
Large cover
Dimension
of cover
Small cover
Detection range
from the front
Detection time
Delayed flush
Trap seal protection
Ambient temperature
Water temperature
NOTE:
The type of fixture determines the minimum pressure required for the valve. Consult fixture
manufacturer for the overall pressure requirement.
* Water pressures over 80 psi are not recommended for most plumbing fixtures.
SPECIFICATIONS
TET2GB
TET3GB
1.6 G (6 L)
12-5/8" (H) ×14-3/16" (W)
< 320 mm (H) ×360 mm (W) >
4-23/32" (H) ×4-23/32" (W)
< 120 mm (H) ×120 mm (W) >
Within 39-3/8" (1000 mm)
Automatic flushing every 24 hours of non-use
- 4 -
Toilet
TET2LB
TET3LB
1.28 G (4.8 L)
Flush Valve type
1" NPT
1-1/4" NPSM
1-1/2" NPSM
25 psi (173 kPa)
125 psi (862 kPa)
7 psi (48 kPa)
6 seconds
3 seconds
TET2UB
TET3UB
1.0 G (3.8 L)
Publicidad
