Storage; Dismantling And Utilisation - Sonel CMP-2000 Manual De Uso

The casing of the meter may be cleaned with a soft, damp cloth
using all-purpose detergents. Do not use any solvents or cleaning
agents which might scratch the casing (powders, pastes, etc.).
Clean the probe with water and dry it. Before the probe is
stored for a prolonged period of time it is recommended to grease it
with any machine lubricant.
The reels and test leads should be cleaned with water and de-
tergents, and then dried.
The electronic system of the meter does not require mainte-
nance.
10

Storage

In the case of storage of the device, the following recommendations
must be observed:

Disconnect all the test leads from the meter.

Clean the meter and all its accessories thoroughly.

Wind the long test leads onto the reels.

In the case the meter is to be stored for a prolonged period of
time, the batteries must be removed from the device.

In order to prevent a total discharge of the rechargeable batter-
ies in the case of a prolonged storage, charge them from time
to time.
11

Dismantling and utilisation

Worn-out electric and electronic equipment should be gathered
selectively, i.e. it must not be placed with waste of another kind.
Worn-out electronic equipment should be sent to a collection
point in accordance with the law of waste electrical and electronic
equipment.
Before the equipment is sent to a collection point, do not dis-
mantle any elements.
Observe the local regulations concerning disposal of packages
and used batteries/rechargeable batteries.
CMP-2000 – USER MANUAL
35