Vitrifrigo MACS Serie Manual página 59

4. GENERAL DESCRIPTION
The range of MACS air conditioners, is composed of standalone systems with direct expansion of refrigerant
gas, water-cooled, for the conditioning of indoor environments in boats.
The machine is designed for installation in the internal areas of boats, see figure 6.
4.1 Description of the MACS Vitrifrigo kits
The following paragraph show a table with quantity and description of each component of the kits sold by
Vitrifrigo.
The accessory kits must always be used with the corresponding machine kits. Ex: The MACS
7 MK kit (Machine Kit) must be used with the MACS 7 AK kit (Accessory Kit).
Vitrifrigo declines any responsibility for inadequate operation of the air conditioning
system, if accessories of different sizes than those defined by the manufacturer are used.
MACS 7M- MACHINE KIT
Quantity Description
1 MACS 7 air conditioning units
1 Control panel
1 Electric control box
1 Machine fixing brackets
MACS 7A – ACCESSORIES KIT
Hydraulic Circuit
Quantity Description
1 Sea water pump PMD371 230V / 50Hz
1 1/2 "sea water intake - brass
1 1/2 "sea discharge - brass
1 1/2 "ball valve - brass / steel
1 1/2 "sea water filter - brass
1 Water pipe L = 10 m - reinforced pvc
12 Screw clamps - stainless steel
Air Circuit
1 Supply grille 254 X 102 mm - plastic
1 Return air grille 254 X 254 mm - plastic
1 Insulated pipe L = 5 m and D = 102 mm - composite
MACS 12M- MACHINE KIT
Quantity Description
1 MACS 12 air conditioning units
1 Control panel
1 Electric control box
1 Machine fixing brackets
58