Heiniger Libertas T-Trimmer Manual De Instrucciones página 38

Cleaning the charging contacts
Only use the charger with dry contacts.
If the charging contacts on the trimmer or connecting plug are dirty, the charging process may be
interrupted or disconnected.
• Carefully clean the contacts using alcohol or white spirit.
7 What to do if...
• ...the trimmer cannot be switched on?
– Is the battery dead? Charge the trimmer using the mains adaptor.
• ...the cutter head plucks hair?
– The cutter head must be cleaned and oiled as described in the „Cleaning and maintenance"
section.
– If this does not improve matters, the cutter head should be replaced; orders can be placed
with the Customer Service.
• ...the LED charge indicator does not light up?
– Clean the charging contacts.
– It is possible that the mains adaptor is not properly connected.
• ...the trimmer switches off by itself?
– The battery is dead. Charge the trimmer in the charging station or using the mains adaptor.
It can also be operated using the power cable.
• ...the battery charge running time is significantly shorter than beforehand?
– The cutter head must be cleaned and oiled as described in the „Cleaning and maintenance"
section.
ENGLISH 35