Publicidad
Idiomas disponibles
Idiomas disponibles
18 Storing
tested pursuant to UN Manual Tests and Criteria
Part III, Subsection 38.3.
The transport regulations can be found at
www.stihl.com/safety-data-sheets.
18 Storing
18.1
Dismantling docking station,
charging cable and power sup‐
ply
STIHL recommends dismantling the docking sta‐
tion, charging cable and power supply during lon‐
ger periods of non-use, e.g., winter break.
► Disconnect the power supply's mains plug
from the wall outlet.
► Clean all components
► Disconnect the charging cable from the dock‐
ing station and power supply and coil it.
► Remove power supply and coil up connecting
cable.
► Disconnect perimeter wire and guide wire from
the docking station.
► Grease wire ends to protect against corro‐
sion and weather conditions.
► Remove docking station
18.2
Preparing the robot mower for
storage
STIHL recommends when the robot mower is not
used for longer periods of time, e.g., winter
break, to put it into "hibernation". Hibernation
deactivates all unnecessary extra functions of
the robot mower and ensures a low discharge of
the battery.
► If the theft protection function in the MYiMOW
app is activated, deactivate the theft protec‐
tion.
Press the following key combination one after the
other:
► Press STOP (3).
The robot mower is stopped and locked
► Press and hold STOP (3) until the light
strip (4) fully lights up red.
0458-012-9801-A
19
4
5
3
®
► Press STOP (1).
The light strip (4) flashes twice. The device
lock of the robot mower is activated.
► Press and hold STOP (3) until the light
strip (4) fully lights up red and finally flashes
red twice.
The hibernation mode is activated. The robot
mower's battery is fully charged. All extra func‐
tions are deactivated.
After the winter break, the robot mower must be
activated so that it is operational again:
► Move robot mower to the mowing area.
► Press START (5).
The "hibernation" mode is deactivated and the
robot mower is once again operational.
18.3
Storing robot mower, docking
station, charging cable and
power supply
► Store the robot mower, docking station, charg‐
ing cable and power supply so that the follow‐
ing conditions are met:
– The robot mower, docking station, charging
cable and power supply are out of the reach
of children.
– Robot mower, docking station charging
cable and power supply are clean and dry.
– Robot mower, docking station, charging
cable and power supply are in an enclosed
space.
– The robot mower's battery is charged.
– All components are not outside of the speci‐
fied temperature limits,
– Robot mower, docking station, charging
cable and power supply cannot tip over.
– The robot mower cannot roll away.
– The robot mower is horizontal on its wheels.
– No objects are placed on the robot mower.
The robot mower can also be stored on a wall
holder. The wall holder is available as an acces‐
sory.
NOTICE
■ If the robot mower is not stored as described
in this User Manual, the battery may become
deeply discharged and irreparably damaged.
► Charge the battery before storage.
English
23.6.
83
Publicidad
