Stihl iMOW 5.0 EVO Manual De Instrucciones página 90

English
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Product Appro‐
val.
The year of construction, the country of manufac‐
ture and the machine number are shown on the
robot mower.
Waiblingen, 2023-01-02
ANDREAS STIHL AG & Co. KG
pp
Robert Olma, Vice President, Regulatory Affairs
& Global Governmental Relations
27 UKCA Declaration of Con‐
formity
27.1 STIHL iMOW
6.0 EVO, 7.0 EVO Robot
Mower
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
Designation: Robot mower
– Manufacturer's brand: STIHL
®
– Type: iMOW 5.0 EVO, 6.0 EVO, 7.0 EVO
– Serial number: IA01
Designation: Docking station
– Manufacturer's brand: STIHL
– Type: Docking station
– Serial number: IA01
conforms to the specifications of the UK regula‐
tions The Restriction of the Use of Certain Haz‐
ardous Substances in Electrical and Electronic
Equipment Regulations 2012, Supply of Machi‐
nery (Safety) Regulations 2008, Electromagnetic
Compatibility Regulations 2016 and has been
developed and built in compliance with the ver‐
sions of the following standards valid at the pro‐
duction date: EN 50636-2-107,
EN 60335-1 Ed 5, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3,
ETSI EN 301 489-1 V2.2.3 (2019-11),
ETSI EN 301 489-3 V 2.1.2 (2021-03),
90
5.0 EVO,
®
27 UKCA Declaration of Conformity
ETSI EN 303 447 V1.2.0 (2020-07),
ETSI EN 301 489-52 V1.1.2 (2020-12),
ETSI EN 301 511 V12.5.1 (2017-03),
ETSI EN 303 413 V1.2.1 (2021-04),
ETSI EN 301 489-17 V3.2.4 (2020-09),
ETSI EN 301 489-19 V2.1.1 (2019-04),
ETSI EN 300 328 V2.2.2 (2019-07).
Participating notified body: INTERTEK Testing &
Certification Ltd, Academy Place, 1 - 9 Brook
Street, Brentwood, Essex, CM14 5NQ, United
Kingdom has verified the conformity according to
Annex III Module B of Directive 2014/53/EU.
The technical documents are stored at
ANDREAS STIHL AG & Co. KG.
The year of construction, the country of manufac‐
ture and the machine number are shown on the
robot mower.
Waiblingen, 2023-01-02
ANDREAS STIHL AG & Co. KG
pp
Robert Olma, Vice President, Regulatory Affairs
& Global Governmental Relations
28 Open Source Software
28.1 Open source software
This product contains copyright protected open
source software that has been published by the
respective copyright holders under certain
license terms such as GNU General Public
License (GPL), GNU Lesser General Public
License (LGPL), Apache License or similar licen‐
ses. If copyright protected notes, terms of use or
license terms are contained in this User Manual
that contradict the terms of an applicable open
source license, they are not used in the User
Manual. The use and dissemination of the con‐
tained open source software is subject exclu‐
sively to the respective open source license.
Insofar as the applicable license grants you the
right to the source code of this software and/or
other additional data, you can obtain the source
code from us during a period of three years after
our last delivery of the product and if the license
terms require it for as long as we offer customer
support for the product. To obtain the complete
corresponding source code from us, you can
send your request with information of the product
name, serial number and version of the corre‐
sponding software to the following address:
0458-012-9801-A