THERMEx READING Manual De Instrucciones página 69

All manuals and user guides at all-guides.com
M 540231361226042018
INSTALLATION
The Reading is available with an internal motor. The range hood can either vent exhaust out
into the open air or re-circulate the air.
Follow the instructions in this guide that match the model that you have purchased and the
way in which you wish to install the exhaust outlet.
INSTALLING THE HOOD
The hood is installed on the wall using the following steps:
1
Measure out and mark the two "keyho-
les" on the wall.
2
x2
THERMEX READING 69
Drill the holes into the wall using a
suitable drill for the type of wall.
x2