THERMEx READING Manual De Instrucciones página 72

All manuals and user guides at all-guides.com
THERMEX READING
72
1
Measure the placement of the bracket
and mark the position of the holes on the
wall.
NOTE: The bracket must be positioned so
that it matches the holes in the duct.
3
Screw the bracket onto the wall.
5
x2
x2
2
x2
Pre-drill the holes and insert the
rawlplugs.
4
x2
Place the duct on the hood.
NOTE: Fasten the duct with two screws.
Push the topmost section of the duct
upwards and attach it to the bracket
with the two self-tapping screws.
M 540231361226042018
x2