THERMEx READING Manual De Instrucciones página 73

All manuals and user guides at all-guides.com
M 540231361226042018
INSTALLING THE DUCT WHEN THE HOOD IS TO BE USED FOR RECIRCULATION
If the hood is going to be used for recirculation, the cover panel must be installed up to the
ceiling to cover the duct.
The duct is therefore installed as follows:
1
Measure the placement of the bracket
and mark the position of the holes on the
wall.
NOTE: The bracket must be positioned so
that it matches the holes in the duct.
3
Screw the bracket and cover panel onto
the wall.
x2
THERMEX READING 73
2
x2
Pre-drill the holes and insert the
rawlplugs.
4
x2
Place the duct on the hood.
NOTE: Fasten the duct with two screws.
x2