Descargar Imprimir esta página

MSW Motor Technics MSW-ES-1010 Manual De Instrucciones página 43

Ocultar thumbs Ver también para MSW-ES-1010:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 202
g)
Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away
from moving parts. Loose clothing, jewelry, or long hair can be caught in
moving parts.
h)
Eye, ear, and respiratory protection is recommended.
i)
The unit is not a toy. Children should be watched to ensure that they do not
play with the unit.
j)
Pointing the gun at yourself, other people or animals is prohibited.
2.4.
Safe use of the unit
a)
Do not overload the unit. Use tools that are suitable for the application. A
correctly selected unit will do a better and safer job for which it was designed.
b)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
c)
Unplug the unit before making adjustments, changing accessories, or putting
it away. This precaution reduces the risk of accidental start-up.
d)
Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
e)
Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
f)
Keep the unit out of the reach of children.
g)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
h)
When transporting or moving the unit from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the unit is used.
i)
Avoid situations in which the machine stops under heavy loads during
operation. This can cause overheating of the drive elements and consequent
damage to the equipment.
j)
Do not leave the unit switched on unattended.
k)
Clean the unit regularly to prevent permanent dirt build-up.
l)
Do not process two workpieces at the same time.
m) Before each use, make sure that the nozzle is properly mounted in the machine
and that the hose is properly attached and undamaged.
n)
Do not carry or hang the unit by the pressure hose.
o)
Do not obstruct the air inlet or outlet.
p)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.

Publicidad

loading

Este manual también es adecuado para:

Ex10062004