MSW Motor Technics MSW-ES-1010 Manual De Instrucciones página 46

3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 45°C and ambient humidity should not
exceed 85%. Use the unit in properly ventilated spaces. Do not block the air outlet
of the unit. Keep the unit away from any hot surfaces. Always operate the unit on a
level, stable, clean, fireproof and dry surface and out of the reach of children and
persons of impaired mental, sensory and intellectual functions. Place the unit in
such a way that the mains plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate!
ASSEMBLY OF THE UNIT
NOTE: Use the supplied wrenches to fasten the connections and tighten them
securely together as the unit operates at very high pressure!
a) Screw the pressure gauge onto the outlet port.
b) Screw the pneumatic hose (reinforced) to the end of the pressure gauge by first
removing the plug from the end.
c) Screw the spray gun to the other end of the hose.