Publicidad
Idiomas disponibles
Idiomas disponibles
Wiping the Memory of Paired Buttons
1. Long-press the pairing button on the chime for ca 10 seconds.
2. The chime will ring 3 times and the memory of ALL paired
buttons will be erased.
Installation of the Doorchime (Transmitter) Button
1. Begin by pairing the button with the chime.
2. Before installation, verify the reliable functioning of the set in
the chosen spot.
3. Remove the rear cover by inserting a screwdriver into the hole
on the side of the button.
4. Use the double sided adhesive tape (included) or two screws to
fix the rear portion of the cover to the wall. Although the button
is weather resistant, choose a location where it is protected,
e.g. in a wall recess.
5. Re-assemble the button.
6. Press the button to ring the chime. Pressing is accompanied by
LED illumination indicating the button has sent a radio signal.
The chime plays the selected ringtone.
Note: The doorchime button (transmitter) can be placed on wood or
brick walls without issue. However, never place the button directly
onto metal objects or materials containing metal, such as plastic
windows or doors that have a metal frame. In such cases, the
transmitter will not work properly.
Upkeep and Maintenance
The wireless digital doorchime is a sensitive electronic device.
Therefore, it is necessary to observe the following precautions:
• The chime (receiver) is designed for interior use in dry envi-
ronments only.
• The chime must be located in an easily accessible location for
ease of handling and unplugging.
• Periodically check the functioning of the doorchime button and
replace the battery in time. Use only quality alkaline batteries
with the prescribed parameters.
• When the doorchime is not used for a long time, remove the
battery from the doorchime button.
• Do not expose the chime to excessive vibrations and shocks.
4
Publicidad
