Descargar Imprimir esta página

MACHEREY-NAGEL NANOCOLOR Advance Manual De Instrucciones página 18

Análisis de aguas
Ocultar thumbs Ver también para NANOCOLOR Advance:

Publicidad

Idiomas disponibles

Idiomas disponibles

Measurements
11.1.3 Absorbance
11.1.4 Kinetics
18
Spectrophotometer NANOCOLOR
After the measurement has been completed, the measurement
result will be displayed in the result window (see 11.3 Result view,
page 21). In case more samples need to be investigated the
next sample can be inserted. Pressing
ment of the next sample.
The basic function Absorbance enables the measurement of a
sample's absorbance against a zero solution.
After having selected this method, a window to enter the wave-
length for the measurement will appear. The wavelengths are
entered in a list by pressing
marked entry is removed.
Confirming with
instrument asks for a zero measurement. Inserting the zero solu-
tion and pressing
successful measurement of the zero solution, the sample solution
needs to be inserted. Pressing
process. After the measurement has been completed, the mea-
surement result is displayed in the result window.
The absorbance values of the individual wavelengths can be
displayed by selecting the corresponding wavelength below the
result.
The basic function Kinetics enables the measurement of a sam-
ple's kinetic against a zero solution. After having selected this
method, a window will appear asking for the measurement time,
a time interval and the measurement wavelength.
Confirming the entries with
Inserting the zero solution and pressing
measurement. After the successful measurement of the zero solu-
tion, the sample solution needs to be inserted. Pressing
the measurement process. A diagram will be displayed showing
the live-recording of the measurement results. When the mea-
surement is finished, the result of the measurement is displayed
as a graphic. A table of the value pairs can be displayed via the
Measured values entry in the options.
Advance 1.0, 11.2020
®
will start the measure-
λ
. By selecting
will open the measurement window. The
will initiate the zero measurement. After the
will start the measurement
opens the measurement window.
the options, the
will initiate the zero
starts

Publicidad

loading

Este manual también es adecuado para:

919750