MACHEREY-NAGEL NANOCOLOR Advance Manual De Instrucciones página 40

System
40 Spectrophotometer NANOCOLOR
deactivated, the user is no longer allowed to change settings in
the device, delete measurements or edit users. The assignment
of a password is mandatory for administrator accounts. Confirm
with saves the created account and adds it to the user list.
By clicking on the
In User Mode the modification of a user account is only possible
with administrator rights.
A marked user can be deleted by clicking on the
confirmation, the user is removed from the list. In User Mode, de-
letion of a user account is only possible with administrator rights.
Deletion of the last user is only possible in Open mode.
To change the user mode, press
Mode or Turn on Open Mode depending on the activated user
mode. After confirmation, the device changes the user mode and
expects the login of a registered user if changing to User Mode.
By clicking on a user and entering the password, the device is
unlocked and the logged-in user is displayed in the status bar.
To change the user, click on the user name in the status bar of
the device. A dialog appears asking you to log off the user. By
confirming, the device is locked again. The user is automatically
logged off when the device enters the power saving mode or turns
off automatically.
In User Mode, the login information is requested at each startup.
The device is already booting in the background during the login.
The icon in the status bar shows that the user has adminis-
trator rights.
Advance 1.0, 11.2020
®
icon, the settings for a user can be edited.
NOTICE
and select Turn on User
icon. After