Publicidad
Idiomas disponibles
Idiomas disponibles
AIRY
Dispensing with the steam wand
6.8
• Immerse the steam nozzle in the
liquid to be heated;
• Rotate the valve knob anticlock-
wise;
• The quantity of steam will be pro-
portional to how much the valve
is open;
• To stop dispensing, turn the valve's
knob clockwise.
To optimally froth the milk, follow
these simple rules:
• Only heat the amount of milk that
you intend to use; once heated, it
will have to be completely poured
out of the jug and cannot be re-
heated;
• Froth the milk which should be at
a temperature of around 4°C.
Carefully move the steam nozzle using the speciic anti-scald
rubber grip (6).
Avoid contact with the steam nozzle, do not place your hands or
other body parts near the steam nozzle tips.
To maintain the steam spouts terminals in perfect eiciency it is
suggested to carry out a short free dispensing at the end of every
use. Keep the tips clean at all times using a cloth dampened in
lukewarm water.
The use of the steam dispensing point (steam nozzle), must always
be preceded by condensation draining for at
least 2 seconds.
Leave the steam nozzle immersed in the milk
only for the heating time required.
Do not open the steam tap with the steam spout
immersed in milk while the machine is of.
38
160
of
Dispensing hot water
6.9
• Place the pot under the hot water
spout;
6
• Press the water button
and wait for the hot water to be
dispensed;
• To stop the water dispensing
ahead of time, press either the
hot water dispensing button
again
.
To programme the hot water, see chapter
XXX.
Avoid contact with the hot water nozzle, do not place your hands
or other body parts near the hot water nozzle tips.
User manual
Publicidad
