AIRY
Cleaning operations
8.5
8.5.1 General instructions
A few simple cleaning tasks are required to have a per-
fectly sanitised and eicient appliance. The instructions
provided here apply when the machine is being used
on a regular basis. If the machine is used consistently,
cleaning should be performed more frequently.
Do not use alkaline cleaners, solvents, alcohol or aggressive
substances. The products/cleaners used must be suitable for this
purpose and not corrode the water circuit elements.
Do not use abrasive cleaners which may scratch the bodywork's
surface.
Always use clean and sanitised cloths when cleaning.
When washing the filters, filter holders and all machine
components, use Manufacturer-supplied cleaners or products
speciic for cleaning professional cofee machines.
Cleaning
Body and Grilles:
Clean the panels of the body with a cloth dampened in
lukewarm water.
Remove the drip tray and cup holder grille and wash with
hot water.
Push button:
Clean the push button exclusively with a soft cloth damp-
ened in lukewarm water.
Before cleaning turn of the machine.
Filter and ilter holder:
Wash the ilters and ilter holders daily and weekly, as
indicated in par. 8.5.2 on page 42.
Perform cleaning operations daily as indicated in para-
graph 8.5.5 on page 43
Steam nozzle:
Keep the nozzle clean at all times using a cloth dampened
in lukewarm water.
Check and clean the nozzle tips, by clearing the steam
outlet holes with a small needle.
Weekly wash as described in par. 8.5.6.
Dispensing group:
Wash the dispensing group as described in par. 8.5.3 .
Carry out an internal cleaning on a weekly basis, as speci-
ied in par. 8.5.4 .
Perform cleaning operations daily as indicated in para-
graph 8.5.5 .
Grinder-dispenser and Hopper
Clean the hopper and the dispenser inside and out with a
cloth dampened with warm water.
When inished, dry all parts thoroughly.
42
160
of
8.5.2 Filter and ilter-holder cleaning
Daily:
• Soak the ilter and ilter-holder in hot water overnight
so that the fatty cofee deposits can dissolve;
• rinse with lukewarm water.
Weekly:
• Use a screwdriver to de-
tach the ilter from the
ilter holder;
• soak the ilter and ilter
holder in warm water
and cleaning agent for
10 minutes;
• rinse with lukewarm water.
Caution: Only immerse the ilter holder cup, avoid soaking the
handle in water.
The detergent must be diluted in cold water in the doses indicated
on the package (see manufacturer).
8.5.3 Washing of dispensing unit
Daily wash the dispensing units daily, as instructed
hereunder:
X
• Remove the ilter from the ilter carrier, and it a blind
ilter (see spare parts);
• pour the speciic detergent (see spares) in the ilter
carrier with blind ilter and hook to the dispensing
X
unit;
X
X
• on the keypad of the group where you want to wash,
X
X
press and hold down the STOP/PROG. key and im-
mediately afterwards press and hold the key
for at least 5 seconds on the same keypad (the same
button LED should lash;
• to start the wash, press button
X
X
and
X
again (buttons
should lash) ;
User manual