Descargar Imprimir esta página

smartheart 01-742T Manual De Instrucciones página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

AC ADAPTER ACCESSORY (NOT INCLUDED)
NOTE: AC adapter not included; out DC 5.0V; Monitor jack size: hole 5.5mm
center pin 2.0mm.
When using an AC adapter, please make sure the monitor turn off or no batteries.
Put the connector plug of the adapter into the socket , Then plug the adapter to AC
outlet. When disconnect the AC Adapter:
Remove the AC Adapter from the electrical outlet;
Remove the AC Adapter plug from the monitor socket.
Do not plug or unplug the power cord into the electrical outlet with wet
hands.
Do not overload power outlets. Plug the device into the appropriate voltage
outlet.
If the AC adapter is abnormal, please change the adapter.
Do not pull out the adapter when you are using the monitor.
Do not use any other type of AC adapter as it may harm the monitor.
Do not position the monitor so that it is difficult to operate the disconnection
device.
12 • ENGLISH

Publicidad

loading