Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
Display shows an
abnormal result.
Display is blank when
power is on.
No response when
STOP/START
is
pressed or when new
batteries have been
loaded.
Monitor keeps re-
inflating.
Possible Cause
Cuff position was not correct or was
not tight enough.
Body posture was not correct during
measurement.
Speaking, excessive movement, angry,
excited or nervous anxiety during
measurement.
Batteries may be expired or installed
improperly.
Incorrect operation; possible strong
electromagnetic interference.
The battery is low.
Circuit is locked.
Solution
Apply the cuff properly and attempt a new
measurement.
Review the 'Taking Your Blood Pressure Reading'
portion of this manual and attempt a new
measurement.
Wait a period of time and attempt a new
measurement after calm has returned; do not
speak or move during measurement.
Check the polarity of the batteries and reinstall if
necessary; replace batteries with new batteries.
Remove batteries and wait a minimum of five
minutes; reinstall batteries and attempt a new
measurement.
Replace the batteries.
Remove and reinsert the batteries;
attempt new measurement.
ENGLISH • 25
Publicidad
