Samoa 508 8 Serie Guía De Servicio Técnico Y Recambio página 2

Idiomas disponibles

DESCRIPTION

Extremely robust high delivery and high hose capacity. A pair of rugged

reliable springs assist to rewind the hose. Heavy duty hose reel. All metal

construction polyester powder coated.

FLUIDS

Water, diesel fuel, suction, DEF.

INSTALLATION-OPERATION

Settle the hose reel over a horizontal robust surface. There are two

different hose outlet positions available. To be able to change the hose

outlet position, it is necessary:

1. Make sure the hose reel is firmly fixed over a horizontal surface.

2. The spool must be blocked by means of the ratchet, to avoid the

power springs to turn it. To block the spool, extract the hose to the

nearest blocking ratchet position. During the hose outlet substitution

process, be careful not to let the spool turn freely.

3. Unscrew the bolts (1), take out the hose outlet rollers (2) , and

disassemble the crosspiece (4) (Fig. 1).

4. Orientate the hose (it is not necessary to disassemble the hose

stopper) towards the new hose outlet position. To do this, grab firmly

the hose, unlatch the spool and turn it until the hose reach its new

position (Fig. 2). Then, latch the spool again, at the nearest position.

5. Assemble between then, the hose outlet components took apart

previously as shown (Fig. 3), and take them to their new position as

shown. Then, screw the bolts (3) (Fig. 4).

6. Finally, assemble the crosspiece (4) (Fig. 4) at the indicated position.

MAINTENANCE

WARNING: Before carrying out any kind of maintenance, close

the nearest shut off valve to the hose reel and open the dispensing

valve to relieve the pressure in the hose. The reel spring is under

very high tension and can cause serious injury if it is released.

Therefor, do not attempt to service the spring inside the reel.

850 829 R. 02/22

SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com

HOSE CAPACITY

1-1/2" 15 m (50')

Fig. 3

Fig. 1

Fig. 2

Fig. 4