Frigomat MIX8 Manual De Uso Y Mantenimiento página 42

13 - ENGLISH
4. SEMI-AUTOMATIC/CONFIRM (◄►)
This button has 4 functions:
1. Whatever the function in progress, the pressing the SEMI-AUTOMATIC
key, access is gained to the programming of the semi-automatic thermal
processing cycle, were it possible to program the maximum temperature
of the product in tank and time for which said temperature will be kept
constant.
2. With the machine in programming, by pressing the CONFIRM (◄►) key
it is possible to confirm the value of the selected parameter.
3. With the machine in SEMI-AUTOMATIC mode, by keeping the SEMI-
AUTOMATIC key pressed for at least 3", the instantaneous temperature
of the bain-marie fluid is temporarily shown on display.
4. With the machine in SEMI-AUTOMATIC mode, by keeping the SEMI-
AUTOMATIC key pressed for at least 10", access is gained to the
control mode of the bain-marie fluid programming (only for qualified
personnel).
5. AUTOMATIC 85°/ DOWN (▼)
This button has 4 functions:
1. Whatever the function in progress is, by pressing the AUTOMATIC 85°
key, the key LED switches on and starts the automatic heating cycle at
85°C.
2. During programming, by pressing the DOWN (▼) key it is possible to
reduce the value of the selected parameter.
3. With the machine in AUTOMATIC 85° mode, by keeping the
AUTOMATIC 85° key pressed for at least 3", the instantaneous
temperature of the bain-marie fluid is temporarily shown on display.
4. With the machine in AUTOMATIC 85° mode, by keeping the
AUTOMATIC 85° key pressed for at least 10", access is gained to the
control mode of the bain-marie fluid programming (only for qualified
personnel).
6. AUTOMATIC 65°
This button has 4 functions:
1. Whatever the function in progress is, by pressing the AUTOMATIC 65°
key, the key LED switches on and the automatic heating cycle at 65℃
starts with subsequent maintenance for 30'.
2. With the machine in AUTOMATIC 65° mode, by keeping the
AUTOMATIC 65° key pressed for at least 3", the instantaneous
temperature of the bain-marie fluid is temporarily shown on display.
3. With the machine in AUTOMATIC 65° mode, by keeping the
AUTOMATIC 65° key pressed for at least 10", access is gained to the
control mode of the bain-marie fluid programming (only for qualified
personnel).
7.LED TER - TEM
The LED switches on to signal any system anomalies.