Publicidad
Idiomas disponibles
Idiomas disponibles
Downloaded by: pd-oliana on 04-04-2023 15:19 CEST
Turn on the appliance (21).
Select the basket with the corresponding
buttons (1,5)
Select one of the 12 preset programs and
adjust the temperature and time with the
corresponding buttons if necessary (2,4).
If you want the cooking process of both
baskets to end at the same time, you can
select "Sync Finish" (13). For this function to
be effective, both baskets must be used. First
press the button (13) and then set both zones.
If you want to use both baskets for the same
type of food, you can select "Dual Cook" (14),
and the same program will be used for both
zones. For this function, press the button (14)
and then the desired program.
Press Start / Pause button (7) to start cooking.
The timer will start running.
Note: Have in mind that if the appliance is cool,
you should add 3 minutes to the cooking time.
Note: If you want to shake the ingredients, pull
the basket out of the appliance by the handle
and shake it. This will not significantly affect
the process.
CAUTION: Basket, tray and food will be very
HOT.
Place the basket over a plain surface able to
work with high temperatures.
Turn the basket to take off the food, avoiding
the risk of burns.
TIME AND TEMPERATURE
You can change the time and temperature
using the +/- symbols according to the buttons.
(2,4) The timer changes 1 minute up or down
for each press. The temperature changes 5°C
up or down for each press.
PRESET PROGRAMS
This appliance has 12 pre-set programs.
To select a program, press the according
symbol.
If you wish you can also change the
temperature and time settings for the pre-set
programs.
Once the program has been selected, press
the start button (7) to start heating. The timer
will start running.
To change any settings while cooking, first
pause, modify and then resume.
NOTE: During the cooking phase, you
can press the pause button (7) to stop the
appliance, the timer will also stop and display
whatever time remains. Press this button again
to resume the cooking phase.
The fryer will beep when the cooking time has
finished. The timer will show "00", the heating
element will stop but the fan will continue
running for about 1 minute, thereafter the hot
air fryer will beep (around 11 times) and will go
onto standby mode.
Check to see that the food is cooked.
If it is not, you only have to put the container
back in the fryer and program the timer to cook
for a few more minutes.
Once cooking has finished, take the whole
basket out of the appliance.
NOTE: If you don't want to use the preset
programs, you can adjust the temperature and
time with the corresponding buttons (2, 4), after
you select the basket with the corresponding
buttons (1, 5). The preset temperature and
time are 180º and 15mins.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Unplug the appliance from the mains.
Let to cool down.
Clean the appliance as it is explained on the
cleaning section.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
It is advisable to clean the appliance regularly
and remove any food remains.
If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
Only the baskets and its tray are suitable for
cleaning in the dishwasher.
The draining/drying position of the articles
washable in the dishwasher or in the sink must
allow the water to drain away easily.
Then dry all parts before its assembly and
storage.
Publicidad
