Diono Radian 3R Manual De Instrucciones página 44

SEAT BIGHTS
Non-Elevated Seat Bight
Place the car seat on the
vehicle seat making sure
the feet of the rear-facing base
are securly tucked in the seat bight
and flat on the vehicle seat bottom. The
front of the car seat will also be touching
the vehicle seat back.
44
REAR–FACING
Elevated Seat Bight
For vehicles with an elevated seat
bight, make sure the feet of the rear-
facing base are flat on the vehicle seat
bottom. With an elevated seat bight it
is acceptable if the front of the car seat
does not touch the vehicle seat back.
DO NOT
push the feet of the rear-
facing base into the elevated seat bight
as this will change the recline angle.