Diono Radian 3R Manual De Instrucciones página 64

7. Tighten the top tether strap
to remove all the slack. There
should not any extra tension
on the top tether. Do not push
on the car seat back while
tightening. Compressing the
car seat into the vehicle seat
might reslult in a top tether
that is too tight. Store any
excess webbing so it does not
become a safety hazard.
8. Test for tightness. Grab the
seat at the
belt path. Try to move the car
seat side-to-side and front-to-
back with the force of a firm
handshake. If the seat moves
less than 1 in (2.5 cm), it is
tight enough.
grasping the top or back of
the car seat. Only check by
grabbing the
belt path opening.
64
FORWARD–FACING
forward-facing
DO NOT test by
forward-facing
7
8