Diono Radian 3R Manual De Instrucciones página 47

6. Attach LATCH/UAS connectors
to vehicle LATCH/UAS anchors
and listen for audible "click" to
confirm engagement.
7. Tighten the LATCH/UAS strap.
With one hand press down
firmly in the center of the
car seat while tightening the
LATCH/UAS strap with the other
hand. You may need to tighten
further by pulling upwards in-
line with the belt path.
8. Test for tightness. Grab the
seat at the bottom of the Rear-
Facing belt path. Try to move
the car seat side-to-side and
front-to-back with the force of
a firm handshake. If the seat
moves less than 1 in (2.5 cm), it
is tight enough.
by grasping the top or back
of the car seat. Only check by
grabbing at the
belt path opening.
REAR–FACING
DO NOT test
rear-facing
diono.com
6
7
8
47