Diono Radian 3R Manual De Instrucciones página 65

LAP BELT CUSHION
*- IMPORTANT!
INSTALLATIONS
TOP TETHER ANCHOR AVAILABLE FROM 22–65 LB
(10–29.5 KG).
*-MUST USE
1. Remove the center buckle pad
by pulling it carefully up and over
the buckle.
2. Unclip seat cover from seat
bottom. Lift seat cover away
from the seat bottom and remove
the buckle.
3. Place lap belt cushion on seat
bottom, and slide the buckle
through the slot in the cushion.
4. Guide buckle through seat cover
bottom and memory foam cushion.
Reattach cover to seat bottom.
5. Reinstall the center buckle pad.
Should you need a longer buckle,
these are available by calling
customer care.
FORWARD–FACING
FOR FORWARD-FACING
USING A
DO NOT USE REAR-FACING.
5TH HARNESS
diono.com
LAP BELT ONLY
SLOT.-*
WITH NO
-*
1
2
3
65