Diono Radian 3R Manual De Instrucciones página 59

8. Tighten the LATCH/UAS
strap. With one hand
press down firmly in the
center of the car seat while
tightening the LATCH/UAS
strap with the other hand.
You may need to tighten
further by pulling upwards
in-line with the belt path.
9. Test for tightness. Grab the
seat at the
belt path. Try to move the
car seat side-to-side and
front-to-back with the force
of a firm handshake. If the
seat moves less than 1 in
(2.5 cm), it is tight enough.
DO NOT
the top or back of the
car seat. Only check by
grabbing the
facing belt path opening.
FORWARD–FACING
forward-facing
test by grasping
forward-
diono.com
8
9
59