Descargar Imprimir esta página

Kuppersbusch BD6340.0S Instrucciones De Instalación página 26

Ocultar thumbs Ver también para BD6340.0S:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
4. Fit a new G9 230V / 25W bulb. Warning!
manufacturer's instructions.
This section describes some of the most fre-
The oven stops working
your installation.
or programmed setting.
perature dial.
The inside light does not go on
out in the Installation Instructions.
The heating pilot light does not turn on
heating up to the selected temperature.
those indicated in the cooking chart.
-
Follow the lamp
-
5. Tighten the glass light cover into place (1).
6. Connect the oven again to the power supply.
along with the most common causes and pos-
sible solutions.
achieved
how your oven operates.
My accessories and shelf supports are
damaged
The enamel colour has changed or stains
have appeared
stuffs may cause changes in the enamel.
properties of the enamel.
Nothing happens when the keys are
pressed
Check if the Safety Block is active.
There are some noises after the cooking
process is finished
This is not a problem. The cooling fan
keeps on working for some time. When the
temperature has dropped sufficiently, the
fan will switch itself off.
-

Publicidad

loading