INSTALL THE SEAT
1. Place the seat assembly over the mounting
brackets and align holes as shown.
2. Connect the seat plug to the machine.
3. Install the washers and nuts and tighten
securely.
4. Attach the sleeve to the nut.
5. Make sure it is securely seated.
INSTALL THE MULCH COVER
The mower is configured for side discharge when shipped. If mulching is desired:
1. Place the mulch cover on the tab on the mower housing.
2. Align the holes in the mulch cover and the holes in the mower housing.
3. Install and tighten the bolts, screws, fixation clamps and bearing ring as shown.
Bolt
Mulch cover
Screw
Fixation clamp
ASSEMBLY
Screw
Bearing ring
Washer
Screw
Bolt
Bolt
Bolt
8
Seat plug
Washer
Nut
Sleeve
Fixation clamp