Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL THE STEER CONTROL LEVERS
1. Lift one steering lever to align the holes in the steering lever with the holes in the corresponding
mounting pole. Select the preferred steering-lever operating height, and then use the wrench
(13*16mm) to secure the steering lever as indicated below.
2. Assemble the other steering lever and in the same way.
The left and right steering levers should be adjusted so that they align with each other when in the
neutral position. NEVER install the steering levers in an asymmetrical operating height.
Do not install the upper handle reversely.
Bolt and washer assembly
Bolt and washer assembly
ASSEMBLY
NOTE
NOTE
9
Publicidad
