Checchi & Magli BABY COMPACT Manual De Uso Y Mantenimiento página 51

Adjusting the packing wheel scraper
The scraper is used to clean the packing wheels, remov-
ing any soil and debris that has built up.
Proceed as outlined below.
1) Loosen the screws (A).
2) Turn the scraper (B) until it reaches the desired posi-
tion.
3) Tighten the screws (A).
4) Repeat the same procedure for the other scraper.
Adjusting the plant control plate
The plant control plate stops the seedlings falling down-
wards before they are ejected.
A
B
UN41 0044CF
Proceed as outlined below.
1) Loosen the nut (A).
2) Adjust the plate (B) as required.
English language
ADJUSTMENT INFORMATION
UN41 0195NG
Move the plate down for smaller seedlings and up for
taller seedlings.
3) After adjustment, tighten the nut (A).
13
B
5
A
Use and maintenance