Publicidad
Idiomas disponibles
Idiomas disponibles
7.1 Functions of the button (8)
The button (8) is used to select the operating mode of the milk frother.
Press the button (8) as many times as necessary for the symbol to indicate the required operating
mode (7, 9, 12, 13). If the button (8) is not pressed for approximately three seconds, the flashing
LED display (7, 9, 12, 13) turns to a solid light and the selected operating mode starts.
Once the programme for the selected operating mode is complete, the milk frother will
automatically switch off.
The programme length depends on the chosen operating mode and the amount of liquid used.
7.2 Function of the whisk (4)
Please note that the milk may burn if the milk frother is operated without a whisk (4).
Whisk
7.3 Operating modes
The milk frother has four different operating modes.
Select the operating mode that best suits your preference.
Operating mode 1
max. 150 ml
Operating mode 2
max. 150 ml
Operating mode 3
max. 300 ml
Heat up and stir
Firm, warm froth
Choose this operating mode to create warm milk froth with a
firm consistency.
Warm and creamy froth
Choose this operating mode to create warm, creamy, fine-
pored milk froth.
Heat up and stir milk
Choose this operating mode to heat up milk.
SilverCrest SMA 500 E1
English - 35
Publicidad
