Publicidad
Idiomas disponibles
Idiomas disponibles
Oven operating light
Before first use
•
To remove any residue from the oven that may have been left from the
manufacturing process, you should select the fan oven function and set the
thermostat to its maximum temperature setting.
•
It is perfectly normal for a smell to be produced during this process.
•
You should make sure that any windows in the room are left open during this
process.
•
It is advisable for you not to remain in the room whilst the burning off process is
taking place.
You should leave the oven on maximum setting for 30 – 40 minutes.
•
•
After the oven cavity has cooled, it should then be cleaned with warm soapy water,
using either a sponge or soft cloth. No abrasive cleaners should be used.
•
Outer parts of the oven should be cleaned with warm soapy water, using either a
sponge or soft cloth. No abrasive cleaners should be used.
•
We would recommend that an appropriate stainless-steel cleaner and polish is
regularly used on the stainless-steel surfaces of this appliance.
Self-Test Mode
After your appliance is connected to your mains supply for the first time, the display shows "AUTO" and
00:00 flashing.
1.
Pres
an
s
d
•
This light will come on to indicate that the
oven's heating elements are in operation. The
light will turn off when the temperature set on
the thermostat control knob has been reached.
It will cycle on and off throughout the cooking
time.
•
• You should not place food inside the cavity,
until the correct cooking temperature has been
reached.
to light up all icons. The buzzer will sound. Release the buttons, the buzzer will
71
Publicidad
